Draft Equipment

New Draft Beer Technology

This is some awesome new beer technology.  Thought I’d share.

If you have some awesome beer technology to share, join us at the Pub for Beer Enthusiasts, Beertaps.com Pub.

DIY – Beer Taps On Steroids

Wall Tap Ideas

Costly Mistakes With Your Kegerator Conversion

You can’t just go in blindly when you are converting your old refrigerator into a kegerator.  I’ve seen some horrible mistakes.  I’ve seen mistakes that have caused the refrigerator to be no longer usable in any capacity.  You don’t want your refrigerator conversion to turn into any of these catastrophes:

One day, a few friends of mine were enjoying their draft beers out of their freshly converted kegerator when all of a sudden they heard a pop.  They didn’t think anything of it because they had been hearing different sounds all day.  One of the beer enthusiasts decided to pour another drink and got a half glass with a lot of foam.  After closer observation, the beer line had popped off the regulator and was damaged.  The beer drinking fun was over until the beer line was replaced.  A good bit of beer was on the bottom of the refrigerator too.  A nice mess to clean up when you have a CO2 tank pumping air through a line to make sure the beer keeps flowing.

I have actually witnessed the next mistake go both ways.  The CO2 regulator needs to be set to the right psi.  Not over and not under.  Can you imagine walking up to the kegerator and not getting anything out of it?  Or worse yet, can you imagine damaging a beer line because you had the psi too high?  Great ways to ruin a party.

But, the one that takes the cake is the amateur who decided to just drill the hole through the door without knowing what he was doing.  The hole was too big for the shank because this guy wanted to drill the hole as big as the nuts.  Enough said about that!  Scrap the refrigerator and go find another one.

So before you make any of these mistakes, make sure that you know everything you need to know before you get started:

Converting a Refrigerator into a Kegerator

The Greatest Home Bar and Home Brewery Story

There are beer enthusiasts who are deeply enriched in the beer making world, who own their own home breweries and who take advantage of all the benefits. Then, there are beer enthusiasts who have never even thought of making their own. I can’t imagine why a beer enthusiast wouldn’t at least be interested in giving it a try, but I’m going to try to change that now.

There are many benefits to brewing your own beer and I’m going to take it one step at a time. When you are ready to get off this wild ride, take stage coach left and no one will think any less of you for it. But I bet once this journey begins, you will want to ride it until the wheels fall off.

First, brewing your own beer is a way of putting a mark on your own home bar. You can even get online and design yourself a label and then place it on your bottles, glasses and beer taps even. When company comes over, you can have them all try it. It might just become their favorite beer meaning you might just get company more often if that seems like something you would like to have.

Then, you can start marketing your beer to the local bars. Give them a taste and see if they like it. There are different ways to make this happen. You can get in touch with a local bar owner and tell them you would like to have a tasting at their bar. You offer some of your beer for free and then when people say they like the taste, the bar owner will most likely want to stock it. Make a thing of it. It’s supposed to be a fun time. So, have fun!

The next logical level is to enter into some beer events. Start locally, but again have fun. Go across the country if you want. The more exposure you get, the more buyers you get. Don’t be surprised when someone approaches you to see if you want a sponsor. Sponsorship can take you to levels you have never imagined. Nationwide distribution. Export. International attention.

By this time of course, you have expanded your enterprise to include so much more than a bucket and a kegerator. You have built your brewery into a high powered system that produces enough beer to satisfy all your orders. You’ve moved your operation to a local location that houses your brewery and invites the neighbors to wander in and have a beer. You’ve had to apply for your beer license so that you can start selling your beer and you’ve had to build a bar so that your neighbors have a comfortable place to sit. You’ve got a sign on the front of your place with your name on it and you’ve been highlighted in the paper as the local beer expert.

With a few different flavors now in your inventory, you can have a seat. Take a breath. You’re finished the first phase of Operation Your Brew. The rest of the ride goes anywhere you want it to go.

Creative Ideas for Your Own Home Bar

It’s extremely understandable that a beer enthusiast with home bar dreams might get a little out of hand. Of course, it’s a phenomenon that home bars are always quite unique and that should be your ultimate goal. But, you have to start somewhere first and then you have to know when to quit.

Your home bar needs more of you than anything else. But, you need a place to start and then you can start pouring your own personality into it. Let’s begin with the basics, discuss different ideas and then move on to how you can bring a bit of you to your own home bar.

The Bar

Of course, any conversation about a home bar would have to begin with the bar itself. Different types of bars normally begin with a wood décor. But, you can go with stone, marble, or leather as just a few ideas to start.

Of course, your stone or marble bar doesn’t have to be expensive. It can be framed with 2×4s and plywood. Then, cover with stone or marble veneer. Leather can be pasted on and then stylishly fastened with brass snaps. But, the wood look is the best.

Of course, you would still frame with 2×4s and plywood. But then, you want to add the nice looking finish of cedar or pine. Why use the ancient not-so-flattering wood paneling when you can have a great looking bar with the quality natural wood look of grooved paneling? No, I am not a salesperson.

You can panel the top as well. But then, add some style with trim. It’s easy and affordable just adding some trim to touch up the edges of your bar. Once the bar is ready, simply add a kegerator with a beer tap and some beer tap handles. Of course, you know what to do. Go with your favorite beer.

Décor

Starting with shelves to hold a collection of beer glasses is the first place I would go once the bar is in place. You can start collecting sets of beer mugs and glasses that represent different beer choices and different pub locations. People get real excited when they see their beer of choice on your walls or if you have a mug of an exotic bar half way around the world. Those are the types of things that start adding your personality to the bar.

Putting beer signs and mirrors on your walls is the next place for you to go. I once met a friend bartender of mine at his bar because we had plans. I arrived right on time because the beer distributor had just shown up to stock more beer in the bar. That’s the perfect time to get great stuff. I was offered a rare beer mirror that the distributor was told to send around with their drivers on deliveries and offer them as a promotion to different bars they serviced. The driver didn’t care who he was giving mirrors to and I ended up with one.

You may not have that kind of luck. But, everyone can look online for unique beer signs and mirrors that they can purchase to decorate their bar. You can start with a few just to get yourself going and then keep your ears and eyes open for opportunities.

Bar Accessories

Your bar is almost finished. But, it’s not quite ready for company yet. You have to add those types of things no one else has. It’s not as tricky as you might think. But, it does take some “good eye” action and be ready for the moment.

A Jagermeister machine is in just about every bar. But, I have rarely seen one in a home bar. Having a Jagermeister machine steps you up into the professional realm where your friends and family will really be impressed.

But, the hottest trend sweeping the nation right now is beer pong. Having a beer pong table with some great beer pong accessories will make for hours of fun when you have company over to your house. There will always be some people who won’t want to hang out in the bar. They’ll want to sit at the dining room table and talk. Well, let them. Have fun playing beer pong for hours while they talk politics on their stuffy bums.

Home bars aren’t necessarily hard to put together. A little planning and you can have an affordable home bar with very little effort. Then, start adding some of your personality to it so that it’s undeniably yours. Friends who didn’t think of it first will be very envious.

Happy Thanksgiving Beer Stuff

This year when we’re drinking your home brew for Thanksgiving…

What?  You’re not making beer for Thanksgiving?  You don’t have a home brew that you make special for Thanksgiving?

Well, how weird is that?

It must not be a tradition everyone shares.  But, see if you can relate to any of these:

• Sitting on the couch and eating Thanksgiving while watching football.
• Same thing…sitting on the recliner with a food tray.
• Saying, “It’s not worth it.  We’re going to a restaurant.”
• I ordered Pizza and Wings one year…

That was the year I had just finished my home bar and I made my first home brew for our New Happy Thanksgiving Tradition. 

I hope everyone has a Happy Thanksgiving and enjoys their own traditions, whatever they may be!

Make your Own Beer, Right on Your Stove

Homemade beer is the best beer in the world, by far. Have you ever tasted anybody’s homebrew? If you have, you probably thought it was darn good. Let me tell you that when it is your own, it is even better. In fact, it is incomparable to anything else on the planet.

I am a beer lover and long-time homebrewer. There is no other hobby that is as satisfying as this one. I have entered many, many homebrewing competitions and have won lots of blue ribbons for my beers, including at my local County Fair (which is a huge one). In fact I had so many ribbons that I finally threw them all away and stopped entering competitions. Now I just brew what I like and drink it while browsing the internet or watching television with my wife. Yep, life is good for homebrewers.

Listen, anyone can make beer on their stove – and I mean really, really good beer. You don’t have to take it to the level that I did. If you enjoy beer one-tenth as much as I do, then I highly recommend that you at least make one batch in your lifetime, just so you can say you did it. Having brewed a batch a beer changes a person, for the better, and forever. You will then be one of my brethren.

You are going to need some simple pieces of equipment: A large pot to brew in, a big food-grade plastic bucket with a lid to ferment in, a small plastic “airlock” and rubber stopper that goes into a hole in the bucket lid, bottles and caps, and a basic bottlecap crimping tool. It also helps to have something to stir with; a big wooden spoon will do nicely.

There are only four ingredients in beer: water, malt, hops, and yeast. Malt refers to malted barley – for your first batch you will simply use packaged “malt extract.” Hops are best purchased in pellet form; they look like rabbit food. A package of dry brewers yeast costs about one dollar. Water can come from any source, but at least two gallons of it needs to be sanitized. Those 2.5 gallon water vessels from the market work nicely.

Homebrew is typically made in 5 gallon batches. This will fill two cases worth of bottles. Take my advice and go for the large, 22 oz. Bottles, as this is less bottling work. You will need 6 total gallons of starting water with about 2.5 gallons chilled in a sealed container. The plastic bucket should be a 6 gallon size. Over half a gallon of water will evaporate while you are brewing.

Here is what you do:

1. Boil 3.5 gallons of water with 6 pounds of malt extract for one hour, adding an ounce of hops at the beginning of the boil, some more hops after 45 minutes, and some more hops when you turn off the heat. Cool the pot in the sink by running water around it. Sanitize your bucket fermenter with a shot of bleach mixed into it full of water. Let that sit for a few minutes with the airlock and rubber stopper then pour out over the inside part of the bucket lid and rinse everything that the bleach solution touched with
hot water.

2. Put the chilled 2.5 gallons of water in the bucket first, then pour the brew from the pot on top of it. Do not stir. Add the yeast and seal the lid tight on the bucket and put the airlock in the stopper and the stopper in the lid-hole. Put water in the air lock. After a day or two the airlock will start bubbling.

3. After a couple weeks its time to bottle the beer. Boil 3/4 cup of sugar with 2 cups of water and add it to your bucket of beer. You can sanitize a measuring cup with hot water, or just put it through the dishwasher with heated drying on. Scoop out the beer with the measuring cup and fill the bottles leaving 1″ of space in them. Crimp the caps on and store the bottles in a cool dark area for two weeks. Clean everything.

4. After two weeks put some bottles in the fridge and enjoy.

Most of brewing is cleaning and sanitation. Everything that comes into contact with your unfermented beer, and even on bottling day after it has fermented, must be sanitized. A small shotglass of household bleach mixed with 5-6 gallons of water makes an effective sanitizing solution, given 5-10 minutes of contact time.

Don’t forget to tell me when the beer is ready to drink. If I live in a nearby state, I just may come over and taste it with you.

About the Author
Andrew Kasch is a beer lover and long-time award-winning homebrewer. Many of his recipes can be found on his website http://www.makeyourownbeer.info

Article source:
Make your Own Beer, Right on Your Stove

Putting The Home Bar Together The Easy Way

When you have your bar and your cabinets built, you’ll want to get to drinking in it…Now.  But, I’ve seen some make shit jobs that aren’t really all that great.  Then, I’ve seen some expensive setups that are way out of the reach of most of us.

So, here’s the home bar the easy way:

The kegerator is the first thing you put in your bar.  It keeps your keg cool and it adds style in an inexpensive way.

This kegerator can actually make the entire bar.  If you choose to use a kegerator like this to hold your kegs, you can make it a part of the bar’s counter top.  Then, you only need counter space on each side.  That’s a setup made easy, as easy as it gets. 

Grab a tap handle of your favorite beer and now you’ve got something to really get you bragging.  There are tap handles of all kinds, from your favorite domestic to your favorite import.  As a promotional tool, every beer you can think of has a beer tap handle for commercial uses as well as the home bar enthusiast.

But, just in case you have a beer of your own or some other “unrecognizable” libation, get the beer tap handle you can write anything on that you want. 

Tell people, “Try Me!”  Give your concoction a name.  Have fun with it and write, “Make Your Own Beer…” or whatever else you might come up with to prank your friends.

You’ve got the bar.  Dress it up in style.  The kegerator and a beer tap handle can turn any room into a bar.  Your bedroom, your dorm room (oops), your garage, your basement, your tree house…

Anywhere!

How To Make Your Home Bar More Bar And Less Home

When you are trying to create a bar in your home, of course you begin with the taps and the handles, mirrors and signs.  You built a bar!  It has to look right.  Right?

But when the bar is in place and you think you have it all, what kind of lame bar serves draft beer in plastic cups?  And I’ll be willing to bet that’s what you have.  Red plastic cups that you bought at the grocery store.  Hmm…all that work and then you tap out at the end.

Well, you can add some specialty glasses so that your friends are drinking in style.  This is where it gets tricky, but you can manage.  You don’t just want to get mugs of any kind.  You need to stock up your cabinets with mugs of all kinds.

Vintage mugs from old fashioned beers add such a touch of class.  Especially when you have friends asking you where you got the mugs.  That’s when you realize saving money on those red plastic cups wasn’t worth it after all.

But, don’t stop there.  You should have Pilsners and Pints, Dimpled Mugs and Retro Pubs.  Get mugs with different logos like Coors, Molson, Blue Moon and Killian.  It’s a blast to make sure that you drink out of the right glass for the right kind of draft.

Logo Beer Glasses

DIY Kegerator – A Beer Keg In Your Refrigerator Or Wherever Else

It’s been a dream for many beer drinkers around the world.  But, putting a keg in an old refrigerator for your apartment, den or garage isn’t that hard to do when you have the right material.

A Kegerator Conversion Kit is all you need and there is something that you may have never thought about, but it’s a surprise and I’ll tell you in a minute.  These conversion kits change any old refrigerator into a kegerator in minutes.  Install the shank and faucet directly in to the door of your refrigerator and hook up the Co2 inside.  You’ll be drinking from your kegerator in no time at all.

But, here’s something that not many people think about.  The Kegerator Conversion Kit can also be used for other home bar designs.  Wall mount it to a closet.  That’s right!  Turn your closet into a kegerator.

All you need to do is install the shank and faucet on the wall the way you would the door of your refrigerator.  Then, grab a large trash can full of ice just like you would for a normal keg party.  Hook up the Co2 inside the closet and you are ready to drink some cold beer with the keg hidden in the closet, fully functional for your party.  Of course, this is really only good for keg parties when you have them.  But, you can try to keep ice in the trash can as you keep swapping out kegs.

As this idea starts to spark the imagination, I want to see Kegerators everywhere!  Garages, Bedrooms, Kitchens, Living Rooms, Bathrooms, through the wall to the Patio outside…etc.

Beertaps has the Kegerator Conversion Kit you need!